Globe Broadband vs PLDT FibEr

Daily dose, ,

A month ago today, we finally moved out of the city and back into my hometown of Silang, Cavite. Aside from figuring out where to put all of our stuff in a much bigger house, one of the things I worried greatly about is getting decent fiber internet service.

Back in Taguig, our PLDT Fiber service of almost 7 years has been mostly reliable and fast. Globe wasn’t available in our neighborhood so Converge became a secondary service, a backup that is so crucial for remote work and online classes.

I tried to get our PLDT Fiber service transferred to Cavite but to no surprise, the process became a lengthy ordeal and ended up being abandoned because it turns out that it’s not available in our new address.

Fortunately, my sister has been on Globe Fiber and she told me that the service has been virtually great and reliable for some years now, so we’ve decided to split the bill and upgrade to a faster subscription of 800Mbps to accommodate the additional users and devices we’ve brought with us.

So far, Globe has not been a disappointment. Except for one inconvenience, we cannot ignore, even when there are a couple of us using the network, we’re only getting roughly 400Mbps connection speed. Half of what we are being billed monthly.

We’ve already reported this to Globe and this afternoon, one of their technicians dropped by to check the connections and the modem. He agreed that our connection speed should way above 400Mbps so he escalated it for further investigation. So now, we wait yet again for the issue to be resolved.

The entire experience just reinforced a couple of observations; first, the quality of internet connection varies largely from one area to another, and second, the state of an ISP’s provider in the area will influence the quality of the service.


So this would be my answer to anyone who’d ask ‘Which internet provider is better?’ It depends, literally on where the location is.

Home Network upgrade

Daily dose, , , , ,

Working from home has been the norm since the pandemic began so having a fast and reliable internet connection has become as important as electricity and running water. Part of improving the home office setup is upgrading the home network in three metrics: redundancy, stability, and improved performance.

For redundancy, I’ve signed up for Converge’s FiberX service as a backup for the primary connection from PLDT. For much of the latter half of 2020, PLDT’s uptime had been really problematic – the connection would go down at least once a month, and worse, it takes more than a week for it to be fixed. Mobile internet wasn’t just enough for our connectivity needs and using a prepaid data connection was too costly.

TP-Link TL-R605 Gigabit Router & load balancer

Having two separate internet connections meant it was time for a load balancer, so I bought a TP-Link TL-R605 SafeStream Gigabit Router. It would also save us from the trouble of manually switching networks whenever either one goes down. It allowed for a near-seamless switch from the 600Mbps PLDT connection to the 300Mbps connection from Converge.

Mercusys Halo H50G WiFi Mesh

Sometime around October last year, I replaced the TP-Link Archer A6 AC1200 with the Mercusys Halo H50G WiFi mesh kit to eliminate dead spots around the house and for better network stability. To complete the upgrade, the existing wired connections were replaced with CAT6 ethernet cables to take full advantage of the Gigabit ports on the load balancer and the WiFi mesh units.

What’s wrong with the existing CAT5 cables that usually come with commercial routers? These cables aren’t really designed to handle network speeds faster than 100Mbps. ISPs today provide modems or routers or a combo box that is future-proof – equipped with Gigabit ports so that they can offer subscription speeds faster than 100Mbps should a customer decides to get an upgrade or give it out sheer generosity.

Switching to CAT6 cables would fix that and allow you to maximize the bandwidth of your subscription especially if it’s above 100Mbps as in my case because the combined speeds of my two connections are above 100Mbps.

The upgrades have been worth the investment as our home network has been more stable and able to let us work, study and stream HD content on multiple devices without worries.

Building bandai’s 1/144 Millennium falcon

Daily dose, , , , , ,

One of the ways I made good use of sheltering in place when COVID first hit the Philippines back in 2020 was to get serious with building model kits.

Bandai Millennium Falcon

It started when I decided it was the best time to build the 1/144 scale Millennium Falcon by Bandai which was a birthday gift from my wife back in 2021. This kit is based on Han Solo’s infamous ship as it appeared in Star Wars: The Rise of Skywalker.

Along with the awesome kit was a set of Tamiya acrylic paints, brushes, and clip holders. After going through hours of tutorials on YouTube, I then bought the other tools and equipment needed: primers, thinners, an airbrush, and even DIY’ed my own spray booth.


More than the final output, the process of cleaning the parts, putting it together, mixing paints, and fine-tuning my newfound airbrush skills was meditative and helped me keep anxieties at bay.


It even helped me with my writing as building the Falcon really got my creative juices flowing. Too bad that most of the writing at the time wasn’t for this blog so this time around I’d kick off the new year with my journey into building model kits.
Funny side story: I spent at hours painting the inside of the Millennium Falcon’s cockpit, which was my first crack at detail painting with a fine paintbrush, paying great attention to the buttons and knobs on the console only to realize that most of it would not be seen from the outside once it’s fully assembled! Paints used were from Tamiya, Armored Komodo, and Vallejo.

Spent hours painting this only to realize much of it would be hidden from view lol


Still, it was another aspect of building model kits that I thoroughly enjoyed – shaking hands and eye strain notwithstanding. Weathering the kit was the part that I enjoyed the most as it allowed for greater creativity in terms of telling a ‘story’ of what the Falcon has been through and the places it’s been to. It also allowed me to get away with small mistakes here and there.
My pictures do not give the kit justice as Bandai did an excellent job with the details and quality, it’s the closest thing I could get to being one of the model builders at Industrial Light & Magic, making something that will be used for filming.


Naturally, the next kits I built after the Millennium Falcon were also from Bandai’s Star Wars line. So expect more posts about building model kits on this blog from here on out. Until next time, Happy New Year!

PLDT’s Shady Speed Boost Promo

Daily dose, , ,

Last Sept 2, I was one of the ‘chosen’ subscribers to get the Free 30-day trial of a speed boost that bumped my connection to up to 600 Mbps with an average speed of 480 Mbps, minimum of 180 Mbps with 80% reliability.

After the 30-day trial period, I would be charged an additional P100 every month to keep using the new subscription speed.

At first, it sounded like a fair deal except for two things:

  1. Don’t we have the right to be informed first and consent to have any changes to our subscription? Instead, PLDT unilaterally decided on its own to modify my subscription and then charge me an additional fee.
  2. My internet connection is still nowhere near the supposed average speed of 480 Mbps since I got notified.

I’m not 100% sure, but somehow something wrong has happened and government regulators should look into this scrupulous action taken by PLDT.

Other subscribers have also raised their concerns on social media. To date, there has been no response from PLDT or government regulators about this.

I’ve already raised these concerns to PLDT’s Customer Support team and let’s see how this will pan out.

WORKAROUND – Unable to Share Files in Google Drive

Daily dose, , , , ,

Recently, I had a problem with sharing files from Google Drive. It’s the dreaded “Sorry, sharing is unavailable at this time. Please try again later.“

Unable to Share Files in Google Drive

The usual troubleshooting of clearing my browser cache & cookies, trying it on Incognito, and even disabling extensions didn’t work. Tried doing it using Firefox but to no avail.

So I contacted the Google Support Team to report the issue and during troubleshooting, we managed to find a workaround:

  1. From the main screen of Google Drive, search for or navigate to the file or folder you want to share.
  2. Right-click on the item, click on Share and the Share dialog box should appear.
Unable to Share Files in Google Drive
  1. Choose your preferred sharing settings then click Done.
Unable to Share Files in Google Drive

I was told by the Google Support Team representative that this is a known bug and that they are currently working on a fix. Hopefully, it gets rolled out soon as this bug is really annoying.

Have you seen the same issue? If you have a different workaround, please share it in the comments below.